CNC Maintenance Repair Technician – Syracuse, NY
$32,07 Per hour
Our client’s division is currently seeking a Maintenance Repair Technician (CNC) - 2nd Shift. This position is based at our Syracuse, New York facility with core hours of 2:30pm to 11:00pm. The hourly rate for this position is $32.07 per hour.
What you’ll do:
Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations.
Need a basic understanding of PLC logic and machine programming (Mcode/Gcode)
Adjust equipment to required specification and check to assure effective operation.
Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory.
Perform electrical test operations.
Work from complex schematic diagrams, manuals and testing procedures.
Troubleshoot all defective printed circuit assembly boards.
Perform similar or associated electrical or mechanical duties as directed.
Detect and report all unusual cases to proper supervision.
Use of judgment to comply with instructions or prescribed routines and to make decisions.
Qualifications:
Required (Basic) Qualifications:
Must have a high school diploma or equivalent from an accredited institution
Journeymen or three (3) years of documented CNC repair maintenance experience in an industrial electrical/mechanical trade
Experience with ladder logic circuit diagrams, industrial motor control schematics, and blueprint reading
Must be able to work in the United States without corporate sponsorship now and within the future
Must currently reside within 50 miles of the Syracuse facility.
Preferred qualifications:
Four (4) years or more of documented CNC repair maintenance experience in an industrial electrical/mechanical trade preferred
Background in machining and electrical equipment
Two-year degree in electronics with mechanical experience/Military electronics experience.
Experience with hydraulics
Benefits:
401K Contributions
Medical, Dental, Vision Insurance effective Day 1
Paid Time Off – Vacation and Holiday’s
Employee Assistance Program
Skills and Certifications [note: bold skills and certification are required]
Three years of documented CNC repair experience or Journeymen
ladder logic circuit diagrams, industrial motor control schematics, and blueprint reading
Compensation
Base Salary - USD $66,705 to $66,705
CNC & NC Machine Setup & Operate – Syracuse, NY
$23.99 per hour
Our client’s division is currently seeking a CNC & NC Machine Setup & Operate P&R. The core hours are 6:00 am to 2:30 pm. The hourly rate for this position is $23.99 per hour.
Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
What you’ll do:
Setup and operate NC and CNC machines and any conventional machines in the Casting Cells to perform a variety of turning, drilling, tapping, boring, reaming, threading, forming, facing, milling, slotting, grooving, chamfering, serrating and deburring operations to produce a variety of explosion-proof parts of various materials
Operate machines include, but are not limited to, single spindle and multi-spindle drill presses and tappers; milling machines; parts washers; and deburring grinder
Refer to assembly drawings, wiring diagrams and machining blueprints to maintain tolerances.
Set controls and perform other manual data input functions as required, review operation data sheets, parts program, tape readouts and prints, and change collets and/or chucks; load and unload parts; load, unload and adjust tools as necessary
Check first piece using fixed or adjustable gauges; gauge periodically and visually inspect all parts for appearance and compliance to specifications; correct for any discrepancies.
Maintain a supply of materials to machines and remove finished work as necessary to establish a flow through the cells
Operate fork truck to facilitate own work or to move material around department as required
Maintain work area, machines and control units in a clean, neat and orderly condition and follow 5-S's principles
Qualifications:
Basic (Required) Qualifications:
Minimum two (2) years’ previous work experience in CNC machine setup and operation
No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Syracuse, NY will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation.
Preferred Qualifications:
3+ years of work experience with NC & CNC machine setup and operation
Fork Truck experience
Skills:
Ability to read and understand blueprints, charts, and tables
Skills and Certifications [note: bold skills and certification are required]
CNC Set
Compensation
Base Salary - USD $49,899 to $49,899
CNC & NC Machine Setup & Operate – Syracuse, NY – 3rd Shift
$23.99 per hour
Our client’s division is currently seeking a NC/CNC Setup & Operate - 3rd Shift. The core hours are 10:30 pm to 6:30 am. The hourly rate for this position is 23.99 per hour.
Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
What you’ll do:
Plan and perform a wide variety of setups and machining operations on all machine shop equipment, including engine lathe, vertical turret lathe, radial drill press, spindle drill press, shaper, surface grinder, horizontal and vertical milling machines.
Use all necessary machine attachments, select tools, feeds and speeds according to material and finish requirements.
Square up and layout production run or special castings for machining operations to fairly close and close tolerances.
Work with a variety of metals such as steel, iron, brass, bronze and aluminum.
Layout, machine, fit and assemble jigs and fixtures to facilitate own work.
Determine operation sequences, make computations for use of dividing head, angles, tapers, fits and assembly.
Check parts for adequate finish allowance, defective material or faulty operation.
Maintain equipment, machines and work area in a clean, safe and orderly condition in compliance with 5s processes.
Qualifications:
Required (Basic) Qualifications:
Minimum two (2) years’ previous work experience in CNC machine setup and operation
No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Syracuse, NY will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation.
Preferred Qualification
Minimum three (3) years’ previous work experience in NC/CNC setup and operation
Skills and Certifications [note: bold skills and certification are required]
CNC Set-Up
Compensation
Base Salary - USD $49,899 to $49,899